ServiceMaster Metropolitan | News & Tips

5 Integral Steps of Any Water Damage Restoration Work Carried Out in Fairfield, NJ

November 13th, 2015 · No Comments

Water damage can result in not only significant damage to your property, but it can also carry several health risks along with it. Water damage can cause mold growth within 24–48 hours, and this brings contaminants into your household. In the event of a water damage, you need to get in touch with an experienced restoration company such as ServiceMaster Metropolitan, which serves Fairfield, NJ and the northern New Jersey area. They will complete all of the necessary restoration work to get you, your family, and your home back to normal as quickly as possible.

Let us look at the steps involved in remediation work carried out by water damage restoration firms.

Steps in Water Damage Remediation

The following is some useful information that has been provided by the IICRC about the steps involved in restoration work.

Step #1: Identification of Water Source and Level of Saturation

  • In a storm, if rainwater is blown by the wind into your home, restoration firms try to identify the entry route and trace the water’s path by using water detection equipment. This helps in the proper identification of wet components such as insulation, ceilings, framing, and walls.
  • In a situation where water is rising, restoration companies determine the extent of water saturation by checking the visible water line on paneling and drywall.

Step #2: Removal of Wet Materials

Restoration firms generally remove all wet components with the aim of exposing saturation pockets, facilitating air circulation, and thwarting microbial growth. The process consists of:

  • Starting work right at the point where water entered into the house and removing wall and ceiling components along the path of the water damage.
  • Removal of sub-flooring material, pad, and carpets that are saturated with water.
  • If a storm surge has been accompanied by contaminated ground water, restoration firms generally dispose of drywall and other types of wall materials up to a height of 15″ inches over the water line.

Step #3: Cleaning Soil Residues

In the case of Category 3 water, the goal is to clean soil residues that have gotten into your house because of a storm surge or heavy rainfall. These steps include:

  • Removing organic contaminants, which can reduce the effect of biocides.
  • Restoration firms utilize pressure washers for flushing contaminants from all salvageable surfaces.
  • Using a wet vacuum to remove contaminated water.

Step #4: Application of Disinfectants

Water damage restoration firms make use of biocides and disinfectants after the cleaning process finishes. Such biocides may include chlorine bleach or hydrogen peroxide.

Step #5: Drying Structural Components

The final step consists of drying the structural components using oscillating fans, dehumidifiers, and air movers. The goal is for any structural components (such as wood beams) to attain the optimum moisture content level of 4%. The ideal room temperature of 72 to 75OF should also be maintained.

If you are looking for a water damage restoration company in Northern New Jersey, you need to get in touch with ServiceMaster Metropolitan.

We have years of industry experience and can quickly restore your home in Fairfield, NJ to its condition before the water damage occurred. Just call us at 1.855.560.7999 and we will immediately come to your home, check the amount of water damage, and b

Tags: Water Damage Restoration ·


 

0 responses so far ↓

  • There are no comments yet. Begin by filling out the form below.

Leave a Comment